Hardware Installation; Rack Mounting The Chassis; Spacing; Connections - Bose ControlSpace SP-24 Installation And Operating Manual

pro.Bose.com

Hardware Installation

Rack Mounting the Chassis

The chassis requires one 1.75" (44 mm) rack space unit (1RU) in a standard 18" (457 mm) deep rack. To secure the chassis to the rack,
use four screws with washers (not provided) to prevent marring the front panel.
Tip: Use of neoprene rubber washers are a good choice because they grip the screw head and prevent the screws from backing out
from vibration or during transportation.

Spacing

When mounting adjacent to heat generating products such as power amplifiers, allow a 1RU open space between the SP-24 sound
processor and the amplifier to allow for air flow.

Connections

Audio Connections

The ControlSpace SP-24 sound processor has two balanced
®
XLR analog inputs and four balanced XLR analog outputs
for connection with a variety of professional-level audio
equipment.
SP-24
Amplifier
English
Installation and Operating Guide

Power Connection

The ControlSpace SP-24 sound processor uses a universal power
supply for worldwide use. AC power connection is made using
the included power cord. Insert the proper power cord for the
voltage used in your region.
A digital device, pursuant to Part 15
gainst harmful interference when
rates, uses, and can radiate radio
on manual, may cause harmful
ntial area is likely to cause harmful
at his own expense.
SP-24
Installation and Operating Guide Page 23