Route Information - Garmin GPS 150 Pilot's Manual

REFERENCE

Route Information

You can create routes by either adding new
waypoints to the active route (if it is empty) as
shown on the right, or by editing any of the other
19 routes as described on page 44.
Section
3
Adding a waypoint to the active route.
Route Catalog page
42
To add waypoints to the active route (while on the Active Route page):
1. Make sure the cursor is not flashing. If it is, press
K
2. Rotate to display the waypoint you would like to insert the new waypoint BEFORE.
C
3. Press .
O
4. Rotate to highlight the waypoint you would like to insert the new waypoint BEFORE.
K O
5. Use and to enter the new waypoint identifier. Press
You will be prompted to accept the new waypoint with the Waypoint
Confirmation page. If you make a mistake entering the waypoint, or do not wish to
add the waypoint, press \; or press E to add the new waypoint.
To display the Route Catalog page:
R
1. Press , and rotate
The Route Catalog page displays the following information:
Route number
Origin/Destination
identifers
C
.
E
O
, if necessary.
Route action field
Parallel track distance selection
(Route 0 only)
or
Comments (Routes 1-19)
.
Route
length