Garmin GPS 150 Pilot's Manual page 29

K O
5. Use and to enter the checklist item. Press
6. You may repeat step 5 to enter more items, or press
To execute a checklist:
N O
1. Press and rotate
C O
2. Press and rotate
3. Scroll through available checklists using
C O
4. Press and use to highlight the checklist you would like to see. Press
E
5. Press to check off list items.
The final NAV page is NAV Menu 2. NAV Menu 2 contains the following functions:
• Approach timer
• Trip Timer
• Scheduler
The approach timer acts as either a count up or a count down timer.
To activate/change/view the approach timer:
N O
1. Press and rotate
C O
2. Press and rotate
K
3. Rotate to select either 'Count up' or 'Count down'. Press
K O
4. Use and to set the time to begin counting from. Press
O
5. Rotate to select the function you would like to perform, 'Start', 'Stop', or 'Reset'.
E
Press . Reset returns the timer to the original count up/count down time.
When the count down timer reaches zero, you will be informed with a 'Timer
expired' message. It will then begin to count up, to indicate how long it has been
since it expired.
E
.
C
when you are finished.
until NAV Menu 1 is displayed.
E
until 'Chklist?' is highlighted. Press .
K
.
• Clock (Date and time)
• GPS Planning
• Sunrise and sunset calculations
until NAV Menu 2 is displayed.
E
until 'Appr Time?' is highlighted. Press
E
.
E
.
E
.
.
REFERENCE
Checklists, NAV Menu 2 &
Approach Timer
Executing a checklist.
NAV Menu 2
Approach timer
Section
1
19