Garmin GPS 150 Pilot's Manual page 36

REFERENCE
Obtaining Waypoint
Information
Section
2
Waypoint Menu page
Entering an airport by identifier.
Entering an airport by city.
26
To choose a waypoint type (for viewing information):
W
1. Press and, if necessary, rotate
C O
2. Press and rotate
Airports, VORs and NDBs may be entered by either the identifier, the facility
name, or the city and state in which it is located. Intersections and user waypoints
must be entered by identifier.
To enter waypoints by identifier:
K O
1. Use and to enter the waypoint identifier in the first field on the page.
As the identifier is entered, the GPS 150 will display any waypoint with the same
identifier you have entered so far. When the desired waypoint is displayed, press C
to remove the cursor.
To obtain waypoint information by entering the facility name of an airport, VOR or
NDB, or the city in which an airport, NDB or VOR is located:
W O
1. Press and rotate
C O
2. Press and rotate
E
3. Press to accept the waypoint type.
O
4. Use to highlight the middle field to enter the city, or:
O
5. Use to highlight the bottom field to enter facility name, or VOR/NDB name.
K O
6. Use and to enter the location or the name (do not use punctuation).
C
7. Press to remove the cursor when the desired waypoint is displayed.
O
until the Waypoint Menu page is displayed.
until the desired waypoint type is highlighted. Press
until the Waypoint Menu is displayed.
to highlight the type of waypoint you wish to view.
E
.