Garmin GPS 150 Pilot's Manual page 24

REFERENCE
NAV Menu 1 & Trip Planning
Section
1
NAV Menu 1
Trip Planning page
Trip Planning page with values calculated.
14
In addition to the Position and CDI pages, the N key features two menu pages
to perform many planning and navigation functions. NAV Menu 1 contains options
to perform the following functions:
• Trip Planning
• Fuel Planning
• VNAV Planning
To display NAV Menu 1:
N
1. Press .
O
2. Rotate until NAV Menu 1 is displayed.
Trip Plan is the first function listed on NAV Menu 1. Trip planning allows the
pilot to view distance, ESA, bearing and estimated time enroute (ETE) between any
two waypoints, and for programmed route. The ground speed can be varied manually
to calculate several possible ETEs.
To use the trip planning function:
N O
1. Press and rotate
C E
2. Press , then to access trip planning.
K
3. Rotate to select 'wpt' for waypoint-to-waypoint planning, or select the route you
E
would like to use. Press
4. If you have selected a route, use
the trip you wish to plan for. Press
5. If using waypoint-waypoint, then use
(To use the current position as a waypoint, leave the corresponding waypoint field blank).
E
Press after each identifier, then press
K O
6. Use and to enter the ground speed. Press
to complete.
This will display the trip direction, distance, ESA and ETE.
• Density altitude/true air speed calc.
• Winds aloft calcuLations
• Checklists
until NAV Menu 1 is displayed.
.
K
to select either 'cum' for cumulative or the leg of
E
.
K O
and to enter the 'to' and 'from' waypoints.
E
on the waypoint confirmation pages to accept.
E
to calculate the values and
C