Running The Quick Dataacq Application; Application - Data Translation DT9850 Series User Manual

Running the Quick DataAcq Application

The Quick DataAcq application is installed automatically when you install the driver
software.
To run the Quick DataAcq application, do the following:
1. If you have not already done so, power up your computer and any attached peripherals.
2. Click Start from the Task Bar.
3. Browse to Programs|Data Translation, Inc| DT-Open Layers for
Win32|QuickDataAcq.
The main menu appears.
Note: The Quick DataAcq application allows you to verify basic operations of the module;
however, it may not support all of the module's features.
For information on each of the features provided, use the online help for the Quick DataAcq
application by pressing F1 from any view or selecting the Help menu. If the system has
trouble finding the help file, navigate to C:\Program Files\Data Translation\Win32\
dtdataacq.hlp, where C: is the letter of your hard disk drive.
Verifying the Operation of a Module
43