Installing Several Smartline Appliances; Combination With A Downdraft Extractor - Miele SmartLine Operating And Installation Instructions

Installation notes
Installing several SmartLine
appliances
The gaps between the individual
SmartLine appliances are sealed with a
silicone sealant that is heat-resistant to
at least 160 °C. With flush-fit
installation, the gap between the
SmartLine appliances and the worktop
must also be sealed with a silicone
sealant that is heat-resistant to at least
160 °C.
After installation, the SmartLine
appliances must be easily accessible
from below, so that the bottom half of
the casing can be removed for
maintenance. If the SmartLine
appliances are not accessible from
below, the sealant must be removed so
that they can be removed.
Combination with a downdraft
extractor
If the SmartLine cooking appliance is
installed in combination with a
downdraft extractor, the latter must be
installed first.
54