Download Print this page

Installation Of Several Appliances - Miele CS 1011 G Operating And Installation Instructions

Hide thumbs

Advertisement

Installation of several appliances

When installing two or more appliances next to each other, a spacer bar b must
be used between each one.
See "Fitting the spacer bars and support brackets".
Worktop cut-out
- two appliances
When installing two appliances, the
width of the cut-out required (D) is
calculated by adding dimensions (A)
and (C).
A = appliance width (288 mm or 380 mm or 576 mm) less 8 mm
B = appliance width (288 mm or 380 mm or 576 mm)
C = appliance width (288 mm or 380 mm or 576 mm) less 8 mm
D = width of worktop cut-out
34
Worktop cut-out
- three appliances
When installing three appliances, the
width of the cut-out required (D) is
calculated by adding dimensions (A),
(B) and (C).
When installing more than three
appliances, for each additional
appliance, add the relevant
appliance width (288 mm or 380 mm
or 576 mm) to dimensions A, B and
C.

Advertisement

loading