Jumper & Switch Setting - Biostar TZ590-BTC DUO Manual

2.6 Jumper & Switch Setting
The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the
jumper is "close", if not, that means the jumper is "open".
Pin opened
JCMOS1: Clear CMOS Jumper
The jumper allows users to restore the BIOS safe setting and the CMOS data. Please carefully
follow the procedures to avoid damaging the motherboard.
Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 1-2 Short", you can use a metal object like a screwdriver to touch
the two pins.
3. Wait for five seconds.
4. After clearing the CMOS values, be sure the jumper is "Pin 1-2 open".
5. Power on the AC.
6. Load Optimal Defaults and save settings in CMOS.
Pin closed
Pin 1-2 Open: Normal Operation (Default)
Pin 1-2 Short: Clear CMOS data
Chapter 2: Hardware installation | 13
TZ590-BTC DUO
Pin 1-2 closed