Biostar TZ590-BTC DUO User Manual
  1. Manuals
  2. Brands
  3. Biostar Manuals
  4. Motherboard
  5. TZ590-BTC DUO
  6. User manual

Biostar TZ590-BTC DUO User Manual

Hide thumbs Also See for TZ590-BTC DUO:
Table of Contents

Advertisement

Quick Links

Download this manual
BIOS User Guide
TZ590-BTC DUO
BIOS Update ������������������������������������������������������������������������������������� 2
UEFI BIOS Setup �������������������������������������������������������������������������������� 6
1� Main Menu ����������������������������������������������������������������������������������� 7
2� Advanced Menu ���������������������������������������������������������������������������� 8
3� Chipset Menu �������������������������������������������������������������������������������21
4� Boot Menu �����������������������������������������������������������������������������������26
5� Security Menu ������������������������������������������������������������������������������29
6� Tweaker Menu �����������������������������������������������������������������������������32
7� Save & Exit Menu �������������������������������������������������������������������������41

Advertisement

Table of Contents
loading

Related Manuals for Biostar TZ590-BTC DUO

Summary of Contents for Biostar TZ590-BTC DUO

  • Page 1: Table Of Contents

    BIOS User Guide TZ590-BTC DUO BIOS Update ������������������������������������������������������������������������������������� 2 UEFI BIOS Setup �������������������������������������������������������������������������������� 6 1� Main Menu ����������������������������������������������������������������������������������� 7 2� Advanced Menu ���������������������������������������������������������������������������� 8 3� Chipset Menu �������������������������������������������������������������������������������21 4� Boot Menu �����������������������������������������������������������������������������������26 5� Security Menu ������������������������������������������������������������������������������29 6� Tweaker Menu �����������������������������������������������������������������������������32...

  • Page 2: Bios Update

    The BIOS can be updated using either of the following utilities: •  BIOSTAR BIOS-FLASHER: Using this utility, the BIOS can be updated from a file on a hard disk, a USB drive (a flash drive or a USB hard drive), or a CD-ROM.
  • Page 3 TZ590-BTC DUO 7. A dialog pops out after BIOS flash is completed, asking you to restart the system. Press the <Y> key to restart system. 8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup.
  • Page 4 Then, the BIOS Update is completed. BIOS Update Utility (through a BIOS file) 1. Installing BIOS Update Utility from the DVD Driver. 2. Download the proper BIOS from http://www.biostar.com.tw/ 3. Launch BIOS Update Utility and click the “Update BIOS” button on the main screen.
  • Page 5 TZ590-BTC DUO 6. After the BIOS Update process is finished, click on “OK” to reboot the system. 7. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS setup. After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>...

  • Page 6: Uefi Bios Setup

    UEFI BIOS Setup Introduction The purpose of this manual is to describe the settings in the AMI UEFI BIOS Setup program on this motherboard. The Setup program allows users to modify the basic system configuration and save these settings to NVRAM. UEFI BIOS determines what a computer can do without accessing programs from a disk.

  • Page 7: 1� Main Menu

    TZ590-BTC DUO 1� Main Menu Once you enter AMI UEFI BIOS Setup Utility, the Main Menu will appear on the screen providing an overview of the basic system information. BIOS Information It shows system information including UEFI BIOS version, Project Code, Model Name, Build Date and etc.

  • Page 8: 2� Advanced Menu

    2� Advanced Menu The Advanced Menu allows you to configure the settings of CPU, Super I/O, Power Management, and other system devices. Note   » Beware of that setting inappropriate values in items of this menu may cause system to malfunction. Connectivity Configuration This item shows Configure Connectivity related options.
  • Page 9 TZ590-BTC DUO Preboot BLE This item enables or disables Preboot Bluetooth function. Options: Disabled (Default) / Enabled Note   » The following items appear only when you set the Preboot BLE function to [Enabled]. BLE Reconnection Delay This item Delay prior to connecting BLE host controller. Value between 0-1000ms. Default is 100ms.
  • Page 10 AVX3 This item enables or disables the AVX 3 Instructions. This is applicable for big core only. Options: Enabled (Default) / Disabled Active Processor Cores This item number of cores to enable in each processor package. Options: All (Default) / 1 / 2 / 3 / 4 / 5 / 6 / 7 Hyper-Threading This item enables or disables Hyper-Threading.
  • Page 11 TZ590-BTC DUO SATA and RST Configuration The BIOS will automatically detect the presence of SATA devices. There is a sub-menu for each SATA device. Select a device and press <Enter> to enter the sub-menu for detailed options. SATA Controller(s) This item enables or disables Serial ATA Device.
  • Page 12 Trusted Computing TPM Device Selection This item allows you to selects TPM device: PTT or dTPM. PTT - Enables PTT in SkuMgr dTPM 1.2 - Disables PTT/ dTPM will be disabled and all data saved on it will be lost. Options: PTT (Default) / dTPM Security Device Support This item enables or disables BIOS support for security device.
  • Page 13 TZ590-BTC DUO Options: Enabled (Default) / Disabled Storage Hierarchy This item enables or disables Storage Hierarchy. Options: Enabled (Default) / Disabled Endorsement Hierarchy This item enables or disables Endorsement Hierarchy. Options: Enabled (Default) / Disabled TPM2�0 UEFI Spec Version This item allows you to select the TCG2 Spec Version Support. TCG_1_2: the compatible mode for Win8/ Win10;...
  • Page 14 ACPI Settings Enable ACPI Auto Configuration This item enables or disables BIOS ACPI auto configuration function. Options: Disabled (Default) / Enabled Enable Hibernation This item enables or disables system ability to Hibernate (0S/S4 sleep state). This option may not be effective with some 0Ss. Options: Enabled (Default) / Disabled ACPI Sleep State This item selects the highest ACPI sleep state the system will enter when the SUSPEND button is...
  • Page 15 TZ590-BTC DUO Restore AC Power Loss Specify what state to go to when power is re-applied after a power failure. Options: Power Off (Default) / Power On / Last State PME Wake up from S5 The item enables the system to wake from S5 using PME event.
  • Page 16 Serial Port Configuration Serial Port This item enables or disables serial Port. Options: Enabled (Default) / Disabled Change Settings This item allows you to select an optimal settings for Super IO Device. Options: Auto (Default) / IO=3F8h; IRQ=4 / IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12 / IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12 / IO=3E8h;...
  • Page 17 TZ590-BTC DUO PCI Subsystem Settings Above 4G Decoding This item enables or disables Above 4G Decoding. Globally enables or disables 64bit capable Devices to be Decoded in Above 4G Address Space (Only if system supports 64bit PCI decoding). Options: Enabled (Default) / Disabled...
  • Page 18 USB Configuration Legacy USB Support The item allows you to enable Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. Options: Enabled (Default) / Disabled / Auto XHCI Hand-off This is a workaround for OSes without XHCI hand-off support.
  • Page 19 TZ590-BTC DUO Device power-up delay in seconds Delay range is 1 ~ 40 seconds, in one second increments. Options: 5 (Default) USB FLASH DRIVE PMAP This item Mass storage device emulation type. ‘AUTO‘ enumerates devices according to their media format. Optical drives are emulated as ‘CDROM’ , drives with no media will be emulated according to a drive type.
  • Page 20 IPv6 HTTP Support This item enables or disables IPv6 HTTP Boot Support. If disabled IPv6 HTTP boot support will not be available. Options: Disabled (Default) / Enabled PXE boot wait time Wait time to press ESC key to abort the PXE boot. Media detect count Number of times presence of media will be checked.

  • Page 21: 3� Chipset Menu

    TZ590-BTC DUO 3� Chipset Menu This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed of the CPU itself uses when communicating with its own special components.
  • Page 22 System Agent (SA) Configuration Internal Graphics This item keeps IGFX enabled based on the setup options. Options: Auto (Default) / Enabled / Disabled Primary Display This item selects which of IGFX/ PEG/ PCI Graphics device should be Primary Display or select SG for Switchable Gfx.
  • Page 23 TZ590-BTC DUO Max TOLUD Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on largest MMIO length of installed graphic controller. Options: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB / 2.25 GB / 2.5 GB / 2.75 GB / 3 GB / 3.25 GB / 3.5GB...
  • Page 24 PCH-IO Configuration PCI Express Configuration PCIEG3X4 PCIe Speed Configure PCIe Speed Options: Auto(Default) / Gen1 / Gen2 / Gen3 24 | 3. Chipset Menu...
  • Page 25 TZ590-BTC DUO Onboard Device Onboard LAN1 This item enables or disables Onbaord LAN1. Options: Enabled (Default) / Disabled 3. Chipset Menu | 25...

  • Page 26: 4� Boot Menu

    4� Boot Menu This menu allows you to setup the system boot options. Setup Prompt Timeout This item sets number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Options: 1 (Default) Bootup NumLock State This item selects the keyboard NumLock state. Options: On (Default) / Off Full Screen Logo Display This item enables or disables Full Screen Logo Show function.
  • Page 27 TZ590-BTC DUO SATA Support If Last Boot HDD Only, Only last boot HDD device will be available in Post. If All Sata Devices, all SATA devices, all SATA devices will be available in OS and Post. Options: Last Boot HDD Only (Default) / All Sata Devices VGA Support If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.
  • Page 28 Other PCI device Determines OpROM execution policy for devices other than Network, Storage, or Video. Options: UEFI (Default) / Legacy / Do not launch Boot Option #1/ #2/ #3/ #4/ #5/ #6/ #7/ #8/ #9/ #10/ #11/ #12/ #13/ #14/ #15 It controls the placement of newly detected UEFI boot options.

  • Page 29: 5� Security Menu

    TZ590-BTC DUO 5� Security Menu Administrator Password This item sets Administrator Password. User Password This item sets User Password. Secure Boot Menu 5. Security Menu | 29...
  • Page 30 Secure Boot Secure Boot feature is active if secure boot is Enabled, when Platform Key(PK) is enrolled and the System is in User mode. The mode change requires platform reset. Options: Disabled (Default) / Enabled Secure Boot Mode Secure Boot mode options: Standard or Custom mode. In Custom mode, Secure Boot Policy variables can be configured by a physically present user without full authentication.
  • Page 31 TZ590-BTC DUO Remove ‘UEFI CA’ from DB Device Guard ready system must not list ‘Microsoft UEFI CA’ Certificate in Authorized Signature database (db). Restore DB defaults Restore DB variable to factory defaults. Platform Key (PK) Options: Details / Export / Update / Delete...

  • Page 32: 6� Tweaker Menu

    6� Tweaker Menu This submenu allows you to change voltage and clock of various devices. Note   » We suggest you use the default setting. Changing the voltage and clock improperly may damage the device.   » The options and default settings might be different by RAM or CPU models.  ...
  • Page 33 TZ590-BTC DUO CPU Ratio Mode This item sets CPU Ratio Mode. Options: Auto (Default) / All Cores / Per Core / Fixed Note   » The following items appear only when you set the CPU Ratio Mode function to [All Cores & Fixed] Ring Max OC Ratio This sets the maximum overclocking ratio for the CPU Ring.
  • Page 34 Memory Configuration Realtime Memory Timing This item enables or disables realtime memory timings. When enabled, the system will allow performing realtime memory timing changes after MRC_DONE. Options: Enabled (Default) / Disabled This item allows you to select CAS Latency, 0: AUTO, max: 36 Options: Auto (Default) tRCD/tRP This item allows you to select RAS to CAS delay time and Row Prechrge delay time, 0: AUTO,...
  • Page 35 TZ590-BTC DUO tRRD This item allows you to select Min Row Active to Row Active Delay Time, 0: AUTO, max: 31 Options: Auto (Default) tRRD_L This item allows you to select Min Row Active to Row Active Delay Time for Same Bank Group,...
  • Page 36 Voltage Configuration BCLK Aware Adaptive Voltage This item enables or disables BCLK Aware Adaptive Voltage. When enabled, pcode will be aware of the BCLK frequency when calculating the CPU V/F curves. This is ideal for BCLK OC to avoid high voltage overrides.
  • Page 37 TZ590-BTC DUO CPU Power Management Intel(R) Speed Optimizer (ISO) This item allows you to set Intel Speed Optimizer (ISO). Options: Supported (Default) / Unsupported Intel(R) SpeedStep(tm) This item allows more than two frequency ranges to be supported. Options: Enabled (Default) / Disabled Intel(R) Turbo Boost Mas Technology 3.0...
  • Page 38 Options: Enabled (Default) / Disabled Enhanced C-states This item enables or disables C1E. When enabled, CPU will switch to minimum speed when all cores enter C-State. Options: Enabled (Default) / Disabled C-States Auto Demotion This item sets C-State Auto Demotion. Options: C1 (Default) / Disabled C-States Un-demotion This item sets C-State Un-demotion.
  • Page 39 TZ590-BTC DUO TVB Voltage Optimizations This service controls thermal based voltage optimizations for processors that implement the Intel Thermal Velocity Boost (TVB) feature. Uses Overclocking Mailbox command 0x18/ 0x19 Options: Enabled (Default) / Disabled GT Power Management RC6(Render Standby) This item enables or disables Render Standby.
  • Page 40 Memory Insight DIMM Profile These items display memory information. 40 | 6. Tweaker Menu...

  • Page 41: 7� Save & Exit Menu

    TZ590-BTC DUO 7� Save & Exit Menu This menu allows you to load the optimal default settings, and save or discard the changes to the BIOS items. Discard Changes and Exit Abandon all changes made during the current session and exit setup.

This manual is also suitable for:

Tz590-btc

Table of Contents