Candy CEHDD30TCT Instruction Manual page 14

4. When the time is set, it will begin to count down
immediately. The display will show the remaining time and
the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.
To cancel the timer, touch the heating zone selection control, and then touch
the timer control, the timer is cancelled, and the "00" will show in the minute
display, and then "--".
6. When cooking timer expires, the corresponding cooking zone will be
automatically switch off and show "H".
Other cooking zone will keep operating if they are turned on previously.
Setting the timer to turn more than one cooking zone
off
1. If more than one heating zone use this function, the timer indicator will show
the shortest time.
(e.g. zone 1# setting time of 2 minutes, zone 2# setting time of 5 minutes,
the timer indicator shows "3".)
NOTE: The flashing red dot next to power level indicator means the timer
indicator is showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating
zone selection control. The timer will indicate its set time.
2. When cooking timer expires, the corresponding cooking zone
will be switch off automatically and show "H".
(set to 5 minutes)
(set to 2 minutes)
EN-13