I
Manuale Operativo
DESCRIZIONE dei TASTI
Tasto a 3 funzioni:
Accensione dello strumento.
Premuto per circa 3 secondi accede al Menu dei parametri.
Premuto per circa 5 secondi spegne lo strumento.
Tasto a 3 funzioni:
Durante la misura, se premuto per 3 sec., esegue lo ZERO
del display fino al 50% della portata del manometro.
Durante la misura, premuto per 5 sec. disabilita la funzione
di ZERO mostrando l'offset del manometro.
All'interno del menu dei parametri decrementa () il
valore sul display.
Tasto a 4 funzioni:
Durante la misura, premuto per 1 sec., attiva la funzione di
Picco+ (indica la pressione maggiore rilevata dopo la sua
attivazione). Durante la misura, premuto per 5 sec., attiva la
funzione di Picco- (indica la pressione minore rilevata dopo la
sua attivazione).
Durante la misura, premuto per 8 sec, visualizza la
temperatura. Per tornare alla pressione premere nuovamente
il tasto.
All'interno del menu dei parametri incrementa ( ) il valore sul
display.
MO.IDRO.533.R5
Key with 3 functions:
It performs the instrument switching on. Pushed for about 3
seconds it enters into the parameters Menu.
Pushed for about 5 sec. it switch off the instrument.
Key with 3 functions:
During the measurement, if pushed for 3 seconds, performs
the ZERO of the display up to 50% of manometer range.
During the measurement, if pushed for 5 seconds, disabled
ZERO function showing the manometer offset.
Inside the parameters menu it decreases (
the display.about 5 sec. it switch Off the instrument.
Key with 3 functions:
During the measurement, if pressed for 1 second it activates
the Peak+ function, (it displays the highest pressure
measured after its activation). During the measurement, if
pressed for 5 seconds it activates the Peak- function, (it
displays the lowest pressure measured after its activation).
Pressed for 8 sec. it displays the temperature in °C, to
come back to pressure press the same key again.
Inside the parameters menu increases (
display.
page 11
Operating Manual
GB
KEYS DESCRIPTION
) the value on
) the value on the
Need help?
Do you have a question about the LAB-IDR and is the answer not in the manual?
Questions and answers