Advertisement
Quick Links
Advertisement
Related Manuals for ATV BSS7212
Summary of Contents for ATV BSS7212
- Page 1 All manuals and user guides at all-guides.com BSS7212 / BSS7550 IR Bullet Cameras...
- Page 2 All manuals and user guides at all-guides.com...
- Page 3 All manuals and user guides at all-guides.com High resolution SONY Super HAD CCD II camera with 700TVL module. 480K(NTSC) pixels. External adjust varifocal Lens. Bracket BSS7212 / BSS7550 IR Bullet Cameras Main Body Camera Lens IR LED Hex Tool...
- Page 4 All manuals and user guides at all-guides.com 1). If cable is preferred to go through walls, loosen the bracket base screws, take away the bracket plate, the cable through the center hole of the bracket plate, and drill a hole on wall and make sure it is big enough for the BNC connector and power jack to pass through.
- Page 5 All manuals and user guides at all-guides.com 2). If cable is does not need to go through walls, the cable can be fixed directly to the wall surface. 3). Connect the BNC end of the camera to the extension cable and the other end of the extension cable connect to your DVR.
- Page 6 All manuals and user guides at all-guides.com 4). Power up the camera and video should appear on screen. 5). You may now adjust the camera viewing angles by adjusting the camera bracket position. Loosen the screws of the camera bracket, adjust the Pan，Tilt and rotate mechanism by hand, once the desired viewing position is camera bracket...
- Page 7 All manuals and user guides at all-guides.com 8). The camera is equipped with a OSD menu, you must remove the OSD button cover of the camera body, press the up, down, left and right buttons and adjust the image effects to get the best image. 9).
- Page 8 All manuals and user guides at all-guides.com BSS7212 / BSS7550 1/3” Color SONY Super HAD CCD II Image Sensor NTSC:976(H) × 494(V) 0.1Lux Color; 0.01Lux B/W (IR LED's On) 2:1 Interlace Scanning System 2.8-12mm or 5-50mm Varifocal Automatic Tracking 2DNR...