Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Rave Sports Manuals
  4. Sports & Outdoors
  5. LUMA TUBE
  6. Operating instructions manual

Rave Sports LUMA TUBE Operating Instructions Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Operating Instructions
WWW.RAVESPORTS.COM
Copyright © 2017
All rights reserved. No part of this publication may be reproduced or transmitted in any form or
by any means, electronic or mechanical, including photocopy, recording, or any information
storage and retrieval system, without permission in writing from the publisher. Requests should
be mailed to RAVE Sports,985 Aldrin Drive #301, Eagan, MN 55121.

Advertisement

loading

Related Manuals for Rave Sports LUMA TUBE

Summary of Contents for Rave Sports LUMA TUBE

  • Page 1 All rights reserved. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopy, recording, or any information storage and retrieval system, without permission in writing from the publisher. Requests should be mailed to RAVE Sports,985 Aldrin Drive #301, Eagan, MN 55121.
  • Page 2 We at RAVE Sports want your experience with our products to be the best it can be. Therefore, please take a few minutes to read the information contained in this manual before inflating and using your product.

  • Page 3: Main Components

    Main Components LUMA Tube (#WP-0186) LUMA Tube Controller (#WP-0189) IMPORTANT: The inflated tube and the controller are separate components so each can easily be replaced, if damaged. Battery information and installation Use 4- AA size batteries only (not included). For maximum life and performance, use 1.2V NiMH (2400 mAH rated capacity or higher) rechargeable batteries.
  • Page 4 Insert batteries into the battery holder on the LUMA Tube controller. Always insert the negative end of the battery (flat end) against the spring in the battery holder. Depress the spring to swing the positive end into place. Ensure the battery is fully engaged at both ends and it is squarely in place.
  • Page 5 Installing controller into LUMA Tube 1. Inflate tube first. 2. Plug the two ends of the connector together. IMPORTANT: Ensure the connector latch is secured. 3. Orient the controller so that the locking screw and tab on the controller are lined up with the nut and tab receiver on the base cup.
  • Page 6 Controller Operation Remove protective film on faceplate before use. Photocell Master ON/OFF MODE control (hidden Photocell button) ON/OFF (hidden button) 5 Modes of Operation- 1. All BLUE LED’s constant ON. 2. All GREEN LED’s constant ON. 3. All RED LED’s constant ON. 4.
  • Page 7 Photocell Press the photo cell on/off button Photocell to activate the operation of the photocell. When the photocell is Photocell ON, the LED’s will automatically ON/OFF (hidden button) shut off in bright light (daylight) to conserve battery life. With the photocell OFF, the LED’s will be on as long as the master switch is ON.

  • Page 8: Battery Charging

    The LEDs will automatically turn ON when the LUMA Tube enters a dark area/tunnel and will automatically turn off when it is in brightly lit areas. Your park patrons will be amazed at the magic of these LUMA Tubes! •...
  • Page 9 Repair and maintenance Small punctures in a LUMA Tube can easily be repaired. Order Tear Aid Patch (#20100) from RAVE Sports. This self-adhesive material quickly and permanently repairs most all punctures in PVC tubes.
  • Page 10 Storage When the product is not being used, remove controller from the LUMA Tube, remove batteries and store in a cool, dry place and up/off the ground. Dry the tube completely before storing. Store the tubes up/off the ground in a cool, dry place. This will help protect it against ultraviolet (UV) rays and extend the life of the product.
  • Page 12 WWW.RAVESPORTS.COM RAVE SPORTS A Revel Match, LLC Company 985 Aldrin Drive #301 Eagan MN, 55121 800.659.0790 June 2017...