Disassembly Instructions - Panasonic ES-ST25 Service Manual

5 Disassembly Instructions

NOTE:
When reassembling, replace the new waterproof rubber.
Make sure whether there is NO foreign substance sticking
around a part covered with water seal.
1. Solder the lead wires.
NOTE:
Make sure of the polarity.
NOTE:
Use lead-free solder. Set the temperature of solder-
ing iron between 350-380°C and touch within three
seconds.
2. Attach the housing O-ring.
NOTE:
Make sure of the position and no foreign substance.
3. Attach the O-ring to the housing A first. And assemble
the side terminals on both sides.
NOTE:
Do not attach the O-ring to the side terminal first as it
makes pinching the O-ring when assembling the
housing.
All manuals and user guides at all-guides.com
8