Advertisement
2 DISASSEMBLY INSTRUCTIONS
Follow the procedure below to disassemble the main unit.
1. Remove the cap, the outer foil and the inner blade.
2. To remove the trimmer driving bar or the slit blade
driving bar, press bars outward.
3. Loosen a screw and remove the bottom cover. Set the
pivot action selector to "LOCK". Slide the back panel
and remove it with care of pivot action selector.
4. Remove the housing clip.
Loosen four screws and remove housing B.
Take out the lock lever shaft.
5. Set the trimmer at about 8mm sliding above. To unhook
the right and left side of upside hooks, slightly pull the
trimmer forward. Then, slightly pull the trimmer in each
side.
6. Take out the tube holder.
3
ES8172-A3 / ES8175-A3 / ES8176-A3
Advertisement
