Maintenance, Service And Repair; Maintenance - YILMAZ CRM 301S Manual

7.2.14 Table is able to rotate when right and left hand buttons are pressed
simultaneously. It is not allowed to rotate table by pressing only one
button. After rotating the table, be sure that support pin (FIGURE 8
NO.2TU014010-0233) is in forward position.
8

MAINTENANCE, SERVICE AND REPAIR

8.1 Maintenance

8.1.1 Cut the electric and pneumatic (if any) power connections of the machine.
8.1.2 Clean all surfaces of the machine from burs, chips and foreign substances. If the machine will not be used for a
long time, lubricate undyed parts with oil that prevents rusting.
8.1.3 When cleaning the machine, do not use materials that may damage the dye.
8.1.4 Control cutting tools against corrosion, distortion and fractions. If cutting tools are damaged, change them.
7.2.15 Temperature
easily on the digital display. Temperature can be
adjusted by using the button shown in Figure.
7.2.16
Remove the part by opening the
clamps.
can be seen
50