Device Drivers Installation; Doscam.sys Installation Procedure - ECS SA 486P AIO User Manual

Chapter 5

Device Drivers Installation

5.1

DOSCAM.SYS Installation Procedure

1. Use the COPY command to copy the appropriate driver from the SDMS SCSI
Drivers diskette to your hard drive.
2.
Add the following line to your CONFIG.SYS:
Device=C:<Path>DOSCAM.SYS
1portant :If the computer system is using the DOS HIMEM.SYS and
EMM386 memory managers, the device drivers should be
listed before these entries.
For example, the line "Device=C: <Path> EMM386.EXE" must come after the
device drivers in your CONFIG. SYS. Listed below is the proper ordering se­
quence.
Device=C:<Path> HIMEM.SYS
DOS=High,UMB
Device=C:<Path> DOSCAM.SYS
Device=C:<Path>
Note : The Device Drivers Diskette bundled with the SA486P AIO
mainboard contains the README text file which provides a
detailed description of the installation procedure.
EMM386.EXE
Device Drivers InstallaJion
5- 1