Garmin TREAD Installation Instructions Manual page 2

Mounting Your Device in an ATV or Side-by-Side
Power Cable Overview
Garmin ® strongly recommends having an experienced installer with the proper knowledge of electrical systems
install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can
cause bodily injury.
See the Important Safety and Product Information guide in the product box for product warnings and other
important information.
Mount connector
10 to 30 Vdc system power (red)
System ground (black)
Mounting Considerations
• The device must be mounted close to the bus bar or battery and within the range of the supplied power
cable.
• The mounting location must allow for the routing and connection of all cables.
• Excess wire should be bundled and secured using the included zip ties.
• The electrical contacts must be free from paint.
2
Tread
Installation Instructions
WARNING
™
Installation Instructions