Functional Description; Wdm-5X Basic Module; Wdm-5X-Bm 80-75 And Wdm-5X-Bm 80-100 - SCHUNK VERO-S WDM-5X Series Assembly And Operating Manual

Functional description

6.1 WDM-5X basic module

6.1.1 WDM-5X-BM 80-75 and WDM-5X-BM 80-100

24 01.00 | WDM-5X | VERO-S modular system for manual workpiece direct
clamping | en | 1504808
6 Functional description
The clamping systems of the modular system WDM-5X can be
combined with individual clamping pillars using change interfaces
similar to a quick-change pallet system, and can be joined using the
manual connecting devices of the system components. This enables a
clamping device setup for 5-sided machining of a workpiece to be
joined together on several clamping pillars.
The clamping systems adapted on the clamping pillars can be actuated
manually.
The basic and add-on modules are available in different heights. This
enables them to be mounted with appropriate system combinations in
increments of 25 mm.
The WDB-5X basic module is first mounted onto the machine table of
the grid plate or a clamping station and either serves directly as a
clamping system for workpiece direct clamping, or as a base for other
elements of the modular system.
These modules can be mounted on 50 / 40 / M12 grids as well as on
VERO-S quick-change pallet modules using size 40 clamping pins. On
request, units with a special torque pin are also available.