Using Holiday Mode; Reading Out Information; To Configure Time And Date; Preset Values And Schedules - Daikin Altherma 3 H F User Reference Manual

4.6.2

Using holiday mode

About holiday mode
During your holiday, you can use the holiday mode to deviate from
your normal schedules without having to change them. While holiday
mode is active, space heating operation and domestic hot water
operation will be turned off. Room frost protection and anti-legionella
operation will remain active.
Typical workflow
Using holiday mode typically consists of the following stages:
1 Setting the starting date and ending date of your holiday.
2 Activating the holiday mode.
To check if holiday mode is activated and/or running
If is displayed on the home screen, holiday mode is active.
To configure the holiday
1 Activate the holiday mode.
▪ Go to [7.3.1]: User settings > Holiday >
Activation.
7.3.1
Activation
From
Till
▪ Select On.
2 Set the first day of your holiday.
▪ Go to [7.3.2]: From.
▪ Select a date.
▪ Confirm the changes.
3 Set the last day of your holiday.
▪ Go to [7.3.3]: Till.
▪ Select a date.
▪ Confirm the changes.
4.6.3

Reading out information

To read out information
1 Go to [8]: Information.
Possible read-out information
In menu...
[8.1] Energy data
[8.2] Malfunction history
[8.3] Dealer information
[8.4] Sensors
[8.5] Actuators
[8.6] Operation modes
[8.7] About
EAVZ16S18+23DA6V(7)+9W
Daikin Altherma 3 H F
4P556076-1A – 2021.09
—
—
—
You can read out...
Produced energy, consumed
electricity, and consumed gas
Malfunction history
Contact/helpdesk number
Room, tank or domestic hot
water, outside, and leaving water
temperature (if applicable)
Status/mode of each actuator
Example: Domestic hot water
pump ON/OFF
Current operation mode
Example: Defrost/oil return
mode
Version information about the
system
In menu...
[8.8] Connection status
4.6.4

To configure time and date

1 Go to [7.2] User settings > Time/date.
4.7

Preset values and schedules

4.7.1

Using preset values

About preset values
For some settings in the system, you can define preset values. You
only need to set these values one time, then reuse the values in
other screens such as the scheduling screen. If you later want to
change the value, you only have to do it in one place.
Possible preset values
You can set the following user-defined preset values:
Preset value
[5.2] Comfort
Tank
temperatures setpoint
under [5] Tank
[5.3] Eco
setpoint
Restriction:
Only applicable
if a DHW tank is
present.
[5.4] Reheat
setpoint
Electricity prices [7.5.1] High
under [7.5]
[7.5.2] Medium
User settings
[7.5.3] Low
> Electricity
price
Restriction:
Only applicable
if Bivalent is
enabled by the
installer.
Additional to the user-defined preset values, the system also
contains some system-defined preset values that you can use when
programming schedules.
Example: In [7.4.2] User settings > Quiet > Schedule (weekly
schedule for when the unit has to use which quiet mode level), you
can use the following system-defined preset values: Quiet/More
quiet/Most quiet.
4.7.2

Setting the energy prices

In the system, you can set the following energy prices:
▪ a fixed gas price
▪ 3 electricity price levels
▪ a weekly schedule timer for electricity prices.
Example: How to set the energy prices on the user interface?
Price
Fuel: 5.3 euro cents/kWh
Electricity: 12 euro cents/kWh
To set the gas price
1 Go to [7.6]: User settings > Gas price.
4 Operation
You can read out...
Information about the connection
status of the unit, the room
thermostat and the LAN adapter.
Where used
You can use these preset values
in [5.5] Schedule (weekly
schedule screen for the DHW
tank) if the DHW tank mode is
one of the following:
▪ Schedule only
▪ Schedule + reheat
The software uses this preset
value if the DHW tank mode is
Schedule + reheat.
You can use these preset values
in [7.5.4] Schedule (weekly
schedule screen for the energy
prices).
See "4.7.2 Setting the energy
prices" [ 4 13].
Value in breadcrumb
[7.6]=5.3
[7.5.1]=12
User reference guide
13