Table of Contents
Advertisement
How to load a paper roll.
Open the paper roll compartment by holding the terminal base securely
1
and lifting the sides of the paper compartment door upwards and back.
Place a paper roll in the compartment. Ensure that the paper end is feeding
2
under the roll and towards the terminal screen, as shown above.
Hold the paper and then close the compartment door until it clicks securely
3
back into position.
Important: The paper roll is thermal-sensitive and will only print on one side.
How to activate your terminal.
If your terminal has been installed by a technician, it will already be activated
ready for use.
If your terminal has been sent to you (via satchel), you'll need to activate it
before you can use it.
Please call the Merchant Helpdesk to activate your terminal.
1800 029 749 (available 24 hours a day, 7 days a week).
Terminal Communication
Wi-Fi.
Wi-Fi can be set up from the Status Bar at the top of the touch screen or through
the Android Settings.
To access the Wi-Fi settings from the Status Bar
1
Swipe down from the top of the screen to view the status icons.
2
Press and hold the Wi-Fi icon
3
Turn Wi-Fi On and select the relevant network from the available Wi-Fi networks.
4
Enter the network password and select CONNECT.
. The Wi-Fi settings will open.
5
Advertisement
Table of Contents
