Adjusting Outlet Temperature; Cleaning The Valve Screen; Rough-Ins - Toto TLM10 Installation And Owner's Manual

ADJUSTING OUTLET TEMPERATURE

1. To decrease temprature: turn
handle clockwise.
2. To increase temprature: turn
handle counter-clockwise
1. Shut the water off at the
stop valves.
2. Disconnect supply hoses.
3. Pull out the screen and clean it
with a brush.
4. Reinstall the clean screen and
connect water supply hoses.
5. Open the stop valves.
Hot

CLEANING THE VALVE SCREEN

ROUGH-INS

2-13/16" (71mm)
Screen
Brush
3/8" COMPRESSION
Cold
6
Screen
Screen
7/8"
(23mm)