Subscribe to Our Youtube Channel
Related Manuals for Toto TEA99 V100
Summary of Contents for Toto TEA99 V100
- Page 1 0G284X 2011.09 Instruction Manual Automatic Urinal Flush Valve TEA99 V100 (Concealed AC type) Important Safeguards Features and Name of Each Part Troubleshooting 6-10...
-
Page 3: Important Safeguards
Important Safeguards Read these Important Safeguards instrucions thoroughly before using your Flush valve Follow the instructions for the correct installations. Symbols are used for safe and proper Mandatory information,the items of use of your Flush Valve and in order observation are classified and described. to alert you possible personal injury and damage to yur property. - Page 4 Warning Never attempt to disassemble,ressemble or repair the vavle. Do not disassemble Otherwise it may cause malfunction or water leakage. Never unplug the power plug with wet hands. It may cause electric shock. Do not touch the power plug during Prohibited thunderstorm.
-
Page 5: Name Of Each Part
FEATURES The front cover and glass-paned 1. Protection against Mischief sensor window are hardly damaged against the intended or unconscious abrasion even if a lighted cigarette is pressed against them. Do not need adjustment when use. 2. Auto-setting for defection zone Press the manual flushing button to 3. -
Page 6: Operation
OPERATION Flushing Detection The infrared sensor Flush water when the detects user standing user moves away from in front of the urinal the urinal. within approx.80cm. Auto-setting for Manual flushing Detection Zone Press the manual Do not need flushing button to adjustment when flush. - Page 7 electrical electrical...
- Page 8 faulty suction cup red/orange red/black blue/blue orange/gray/yellow Please Cut the power supply in case of electric shock. The water flushing volume is not appropriate.
- Page 9 Wire harness for solenoid Water shutoff valve power shutoff Wire harness for power supply dirt dirt shutoff NOTE...
- Page 10 No water comes from the flush valve No power or power supply defects. Check the water Remove the power Check if the Power supply No water supply valve and connectorand solenoid valve comes from and circuit the water shutoff reinstall them.Hold wires are well the flush is OK.
- Page 11 The lamp is on after power is connected. All the items marked with are the system that will finish auto-setting within 3 to10 minutes. Be sure to cut the power supply before checking. Connect power supply or solve No water comes power supply No water comes from the flush valve.
- Page 12 Rotate to open. Disconnect dirt appropriate Valve base Constant flow valve Valve cover When the water pressure is less than 0.07MPa,the water flushing volume becomes small. The proposal is open the valve cover with hex nuts tool and Clamping Filter remove constant flow valve and clamp ring.
- Page 13 TEA99 V100 Model Product Name Automatic Urinal Flush Valve Power Supply Dimension Detection Range Within 800mm from the sensor window flush Discharge Quantity Ambient Temperature Feed Water pressure Holding State Consumed Power Flowing State Inlet pipe...
-
Page 14: Limited One-Year Warranty
Country. 5. To obtain warranty repair service under this warranty, you must take the product or deliver it prepaid to a TOTO service facility together with a letter stating the problem, or contact with a TOTO distributor or products service contractor, or write directly to TOTO sales office.
Need help?
Do you have a question about the TEA99 V100 and is the answer not in the manual?
Questions and answers