IBM 3U Extend Run Operation And Setup Manual page 6

DANGER
Uninterruptible power supply (UPS) units contain specific hazardous materials. Observe the following precautions if your
product contains a UPS:
• The UPS contains lethal voltages. All repairs and service must be performed only by an authorized service support representa-
tive. There are no user serviceable parts inside the UPS.
• The UPS contains its own energy source (batteries). The output receptacles might carry live voltage even when the UPS is not
connected to an AC supply.
• Do not remove or unplug the input cord when the UPS is turned on. This removes the safety ground from the UPS and the
equipment connected to the UPS.
• The UPS is heavy because of the electronics and batteries that are required. To avoid injury, observe the following precautions:
°
Do not attempt to lift the UPS by yourself. Ask another service representative for assistance.
°
Remove the battery, electronics assembly, or both from the UPS before removing the UPS from the shipping carton
or installing or removing the UPS in the rack. (D007)
CAUTION
Energy hazard present. Shorting might result in system outage and possible physical injury.
Remove all metallic jewelry before servicing. (C001)
CAUTION
Lead-acid batteries can present a risk of electrical burn from high, short-circuit current. Avoid battery contact with metal materials;
remove watches, rings, or other metal objects, and use tools with insulated handles. To avoid possible explosion, do not burn.
Exchange only with the IBM-approved part. Recycle or discard the battery as instructed by local regulations. In the United States,
IBM has a process for the collection of this battery. For information, call 1-800-426-4333. Have the IBM part number for the battery
unit available when you call. (C004)
or
>32 kg (70.5 lb)
CAUTION
The weight of this part or unit is between 32 and 55 kg (70.5 and 121.2 lb). It takes three persons to safely lift this unit. (C010)
CAUTION
To avoid personal injury, before lifting this unit, remove all appropriate subassemblies per instructions to reduce the system weight.
(C012)
or
32-55 kg (70.5-121.2 lb)
4