Table of Contents
Advertisement
General Operation
Power On/Off Button
/
Press the
button to SRZHU the unit
when the vehicle ignition is on. Press
and hold the button to turn the unit off.
Adjust Volume level
Rotate the knob to adjust WKH volume level.
5RWDWH it clockwise to increase and anticlockwise
WR decrease the volume.
Audio Mute
/
Press the
button to mute the volume
from the system. "MUTE" will appear on the
display panel and the volume will mute.
/
Press the
button again, or rotate or
press the knob to return the volume level to
the SUHYLRXV setting
Audio Controls
To adjust the bass, treble, balance and fader,
press the knob until the appropriate audio
PRGH appears on the display panel. Within
five seconds, rotate the knob to adjust the
audio settings for the selected function.
Mode Button (SRC)
Press the SRC button FRQWLQXRXVO\ to change
WKH Iollowing mode: Radio, USB (when USB is
LQVHUWHG), Card(when SD/MMC card is in),
#7: RNC[ GVE
Auxiliary Input
To access an auxiliary device:
1. Connect the portable audio player to the
#7: KPVGTHCEG QP VJG HTQPV RCPGN
2TGUU VJG 54% DWVVQP VQ UGNGEV #7: OQFG
6Q ECPEGN #7: OQFG RTGUU 54% CICKP
Display Selector (DISP)
This unit can display the clock time, radio
frequenc\ or PTY type. Ordinarily, the radio
frequency or MP3/WMA track indication is
VKRZQ 7he unit will display the time ZKHQ
the DISP button is pressed. The time ZLOO
display for approximately 5 seconds then
return to previous mode.
Setting the Clock
The correct time of day can be set by pressing
and holding the DISP button.
To set the clock, perform the following steps:
1. Press the DISP button to view the clock.
2. With the clock visible on the display, press
and hold the DISP button until the time
FKURNC[ CUJGU
3. Within 5 seconds, rotate the knob counter
clockwise to adjust the minutes to the
desired setting. To change the hour, rotate
the knob clockwise to adjust the hour to the
desired time.
2TGUU &+52 VQ EQP TO
EN - 4
Advertisement
Table of Contents
