Table of Contents
Advertisement
5. Unpacking
To unpack the machine, remove the steel strips first and remove the box. Check for missing parts. In
cases of doubt, please contact the service before installing the device.
6. Workplace
The selected workplace should meet health and safety requirements, have access to electrical power
supply and air source as described in the manual. Adequate air circulation should be ensured in the
room so that the machine can function smoothly. Position the device in the working position while
retaining minimum wall spacing (see Figure 2). When installing the device in the open, place the device
under a shed to protect against rain and sunlight.
Warning: The engine device must not be operated in an explosive atmosphere.
Fig. 2
4
Advertisement
Table of Contents
