Castex CASC505 Manual page 13

16.Fault detection
Vulnerability
The Stage rotates only in the
one page or not at all.
The problem with lowering and lifting
the jaws, jamming on the Stage.
The head touches the rim during the
operation.
The rim deferment arm and clamping
jaw do not return to their initial
position.
Tilting the rim works faulty.
Vulnerability
Cause
Help
Cause
Faulty switch
Damaged belt
Engine malfunction
Leakage from the air system
Cylinder not working
Worn jaws
Destroyed cylinder handle
washers
The clamping plate is incorrectly
fitted or is inadequate
Loose screws of the handle, the
plate must not tighten
Faulty pedal spring
Clogged silencer .
Faulty rim dust collector cylinder
gasket.
The switch holder is not movable
1) It is not connected to an air source
2) Damage to the air duct prevents free air flow
3) The valve has been damaged
1) Connect the air source while maintaining the required pressure;
2) Check the air edivion, replace the damaged wire and the joints;
3) Contact the service.
Help
Replace
Replace
Check cables or cables:
Replace the engine if it is
damaged.
Check all parts of the air
system
Replace the cylinder
piston.
Replace jaws
Replace
Replace or adjust.
Tighten the screws,
replace the plate.
Replace
Clean or replace.
Replace
13