Download Print this page
Seconique NEVADA 100-103-065 Assembly Instructions Manual

Seconique NEVADA 100-103-065 Assembly Instructions Manual

3 drawer bedside

Advertisement

Quick Links

ASSEMBLY INSTRUCTIONS
!
DO NOT USE
PLEASE READ BEFORE YOU CONTINUE FURTHER
CARE AND MAINTENANCE
After unpacking this product please keep the original packaging in case it needs to be returned for any reason.
Please ensure all fi ttings and parts are present before commencing with assembly.
Never drag or push products as this could cause damage to the joints making it inferior.
We strongly recommend that you keep children away from your work area.
Assemble this product as close to its fi nal position as possible.
Do not place this product next to a radiator or in direct sunlight.
Do not drag or push items across your high gloss furniture as this may cause the surface to scratch.
Wood is a natural product and may expand if subjected to damp and may shrink or crack if subjected to heat.
Therefore it is recommended that room temperature is maintained, with no sudden temperature fl uctuations.
Make sure any spillage is wiped off immediately.
Do not place hot or chilled items directly on to the surface, use a place mat or marking will occur.
For general cleaning use a soft cotton or micro fi bre cloth, and do not use detergents of any kind.
From time to time it may be necessary to tighten fi ttings, regular inspections should be carried out.
Do not place on a wet or damp fl oor as staining may occur to your fl oor.
NEVADA 3 DRAWER BEDSIDE
RUSTIC OAK EFFECT
IMPORTANT
FOR DOMESTIC USE ONLY
SEC/AY/04/21/HN1
ITM/D13-
54812HN
54812HN
PAGE 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the NEVADA 100-103-065 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Seconique NEVADA 100-103-065

  • Page 1 SEC/AY/04/21/HN1 ITM/D13- NEVADA 3 DRAWER BEDSIDE 54812HN 54812HN RUSTIC OAK EFFECT ASSEMBLY INSTRUCTIONS DO NOT USE IMPORTANT FOR DOMESTIC USE ONLY PLEASE READ BEFORE YOU CONTINUE FURTHER CARE AND MAINTENANCE After unpacking this product please keep the original packaging in case it needs to be returned for any reason. •...
  • Page 2: Tools Required

    SEC/AY/04/21/HN1 ITM/D13- TOOLS REQUIRED PARTS LIST Please Note: The below parts have all been stamped with the part number to help identify them during assembly. Part Number Part Code Part Description Quantity Carton S100-103-065-HN1-01 Left Side Panel S100-103-065-HN1-02 Right Side Panel S100-103-065-HN1-03 Front Baseboard S100-103-065-HN1-04...
  • Page 3: Fittings List

    SEC/AY/04/21/HN1 ITM/D13- FITTINGS LIST Flat Head Screw Flat Head Screw O 4,0x45mm (04x) Hole Plugs (04x) Glue (2x) O 3,5x10mm (66x) Flat Head Screw O 3,0x16mm (21x) 2/+ Dowel O 5x25mm (36x) Tack 10x10mm (26x) Plastic Foot 16x20mm (4x) Metal support 4 holes (12x) Drawer Runners (3x) Zamac handle 128mm (3x) Cam Bolt (4x)
  • Page 4 SEC/AY/04/21/HN1 ITM/D13- STEP 1 PARTS REQUIRED 1 - LEFT SIDE PANEL Detail 1 HARDWARE REQUIRED TOOLS REQUIRED Detail 3 C + F Detail 3 Detail 1 STEP 2 PARTS REQUIRED 2 - RIGHT SIDE PANEL Detail 1 HARDWARE REQUIRED TOOLS REQUIRED Detail 3 C + F Detail 3...
  • Page 5 SEC/AY/04/21/HN1 ITM/D13- STEP 3 Detail 2 PARTS REQUIRED 2 - RIGHT SIDE PANEL Detail 2 HARDWARE REQUIRED Detail 2 Right TOOLS REQUIRED PRE-DRILLED HOLE SECOND HOLE Please note: Pre-Drilled FIRST HOLE (LINE UP WITH PRE-DRILLED HOLE) Holes Detail 2 STEP 4 Detail 2 PARTS REQUIRED 1 - LEFT SIDE PANEL...
  • Page 6 SEC/AY/04/21/HN1 ITM/D13- STEP 5 PARTS REQUIRED 3 - FRONT BASEBOARD Detail 1 Detail 1 4 - BACK BASEBOARD HARDWARE REQUIRED Detail 1 Detail 1 Detail 1 Detail 1 TOOLS REQUIRED Detail 1 Detail 1 C + F Detail 1 STEP 6 PARTS REQUIRED 2 - RIGHT SIDE PANEL Detail 10...
  • Page 7 SEC/AY/04/21/HN1 ITM/D13- STEP 7 PARTS REQUIRED 1 - LEFT SIDE PANEL Detail 6 Detail 10 Detail 6 HARDWARE REQUIRED Detail 10 TOOLS REQUIRED Detail 6 Detail 10 STEP 8 PARTS REQUIRED 5 - TOP PANEL Detail 5 Detail 5 Detail 5 HARDWARE REQUIRED Detail 5 TOOLS REQUIRED...
  • Page 8 SEC/AY/04/21/HN1 ITM/D13- STEP 9 PARTS REQUIRED 5 - TOP PANEL Detail 10 Detail 4 Detail 10 Detail 4 HARDWARE REQUIRED TOOLS REQUIRED Cam bolt head needs to be in centre Detail 10 Detail 4 STEP 10 PARTS REQUIRED 6 - BACK PANEL Detail 7 * For your future reference Order Number should be here...
  • Page 9 SEC/AY/04/21/HN1 ITM/D13- STEP 11 PARTS REQUIRED 8 - DRAWER SIDE Detail 8 HARDWARE REQUIRED Detail 8 Detail 1 Detail 1 Detail 1 Detail 1 TOOLS REQUIRED C + F Detail 1 Detail 8 1° STEP 12 PARTS REQUIRED 7 - DRAWER BACK PANEL x3 8 - DRAWER SIDE HARDWARE REQUIRED Detail 10...
  • Page 10 SEC/AY/04/21/HN1 ITM/D13- 2° STEP 13 PARTS REQUIRED 9 - DRAWER FRONT Detail 10 Detail 9 HARDWARE REQUIRED Detail 10 TOOLS REQUIRED Detail 9 Detail 10 Detail 11 3° STEP 14 PARTS REQUIRED Detail 11 10 - DRAWER BOTTOM Detail 15 HARDWARE REQUIRED TOOLS REQUIRED Detail 11...
  • Page 11 SEC/AY/04/21/HN1 ITM/D13- STEP 15 Detail 12 4° Detail 12 Detail 12 Detail 12 HARDWARE REQUIRED Left Right TOOLS REQUIRED Detail 12 USE THE E SMALLEST HOLE 5° STEP 16 Detail 13 HARDWARE REQUIRED TOOLS REQUIRED Detail 13 PAGE 11...
  • Page 12 SEC/AY/04/21/HN1 ITM/D13- STEP 17 If desired, after assembly, use an alcohol cleaner to erase part of the numbers. Detail 14 Detail 14 HARDWARE REQUIRED PAGE 12...