LaCie 2big NAS User Manual page 34

Hide thumbs Also See for 2big NAS:

Table of Contents

Step 6: Install NAS OS

Note: The steps below should be completed by the NAS's administrator.

Perform the steps below on a PC/Mac connected to the same network as your LaCie NAS.

Launch your preferred internet browser and type the default address for the LaCie NAS:

Windows workstations (no Bonjour) - http://lacie-2big-nas

Mac OS X and Windows workstations running Bonjour - http://lacie-2big-nas.local

Enter the MAC addresses for your 2big NAS. It is not necessary to enter the colons.

Choose Start Install.

Choose Continue at the prompt to install NAS OS. To accommodate the installation, all data stored on the

hard disks will be deleted.

It takes approximately five minutes to format the hard drives and install NAS OS. Once it is finished, you are

prompted to create an administrator password. You can also change:

The name of the device.

The administrator login (the default login is admin) and remote access credentials.

The RAID configuration.

The time zone.

Make certain to note your login and password for future use.

Choose Finish to access the NAS OS Home page. You can remove the key from the device. Keep it in a safe

location for future use.

LaCie NAS OS 4 User Manual

Table of Contents

5big nas pro