LaCie 2big NAS User Manual page 17

You are prompted to enter a MAC address unique to your enclosure. You can find a MAC address by:
Looking on the bottom of the enclosure for a sticker. It has two numbers that correspond to LAN 1 and LAN 2.
Use one of the two numbers as the MAC address.
Connecting a VGA monitor to the VGA port located on the back of the LaCie 5big. Following the initial boot
process (Step 3), the system provides the MAC and IP addresses. If the monitor is receiving a signal but the
image is black, try connecting a USB keyboard to one of the USB ports also located on the back of the LaCie
5big. The system may have reverted to energy conservation mode which you can exit by striking one of the
keys on the USB keyboard.
LaCie NAS OS 4 User Manual 17