LaCie 2big NAS User Manual page 26

INSTALLATION STEPS
Step 1: Connect and power on the diskless 2big NAS
1. Make sure that the disk slots are empty. You will be prompted to insert disks in Step 3.
2. Connect the Ethernet cable to the Ethernet port on the back of the product and to an available Ethernet port
on your router. Refer to your router's documentation if necessary.
3. Connect the power supply to a wall outlet and to the product.
4. Push the power button on the back of the device to the ON position. The front LED will turn on and then
begin blinking blue. Once the LED stops blinking, move on to the next step.
LaCie NAS OS 4 User Manual 26