Setting The Input Level - Yamaha AW2400 Manual

5. Cursor to OK and press the [ENTER] key.
The TITLE EDIT popup window will appear, allowing you to name your song.
6. Assign a name to your song using the cursor arrows and the Jog Wheel.
7. After naming the song cursor to OK and press the [ENTER] key.

Setting the Input Level

After creating a new song the next step is to set the input level for the
instrument or other sound source that you will be recording.
1. Raise the Stereo Fader (the red
fader) to the 0 position. This is all
of the way up.
If the Stereo Fader is already up,
first lower it and then raise it back up to
the 0 position.
4. Make sure the input fader for the input you connected to is set to the 0
position. To select the input layers press [INPUT SEL] key for the input
that you are going to record from.
7