Troubleshooting - Klarstein KAMINI FXL 2G Manual

TROUBLESHOOTING

Note: If problems occur, first read the instructions in the table below before
contacting the manufacturer or customer service.
Problem
The unit does not emit
warm air.
The device switches off
and cannot be switched
on again.
The unit does not switch
on even though the
power switch has been
set to the 'I' position.
Potential cause
The overheating
protection of the device
has been triggered.
The overheating
protection has been
triggered.
The fuse in the fuse box
has blown out.
The overheating
protection has been
triggered.
Solution
Switch off the device
immediately and pull the
power plug out of the
socket. Allow the unit to
cool down and wait at
least 10 minutes before
reconnecting the power
plug to the wall outlet
and restarting the unit.
Reset the fuse.
Switch off the device
immediately and pull the
power plug out of the
socket. Allow the unit to
cool down and wait at
least 10 minutes before
reconnecting the power
plug to the wall outlet
and restarting the unit.
EN
23