Table of Contents
Advertisement
.
4 INFORMATION REGARDING OPERATION OF BALTIMATIC ® TEDDER
4.1. General information
BALTIMATIC ® Hay Tedder with two rotors is a 3 point hitched machine adjusted for work at
slopes no more than 12 degree and working with tractor class 0.6 and higher. Tractor should be
equipped with standard front weights. For driving of BALTIMATIC ® Tedder should be used
standard PTO shaft with 1 3/8' spline in both ends. 130 NM transferring power 8KW.
4.2. Construction and work of BALTIMATIC ® Hay Tedder
It is a 3 point hitched machine, getting power from PTO shaft.
The layout of 3 point hitched points is acc. To norm ISO 730-1 & AC1: 1996.
BALTIMATIC ® Hay tedder is built from frame (1) to which are fixed working
assemblies/components. Working components are rotating elements (2) to which are fixed arms (3)
with doubled spring fingers (4). The power for rotating elements is coming via PTO shaft, pulleys
and V-belts. Belt pulley with spring fingers rotate in opposite direction. Spring fingers touch the cut
grass / straw - turning it. Support wheels (5) are following the ground to ensure even ground
clearance for spring fingers. To the frame of machine are bolted safety barriers (8) preventing
access to rotating working elements. To barriers are welded clamps (9) for fixing lights-warning
plates (10) and triangle plate (11) (ACC. TO NOMR PN-93/r-36154
BALTIMATIC ® HAY TEDDER WITH TWO ROTATING ELEMENTS
1. 1-HITCHED FRAME, 2-ROTATING ELEMENT, 3-ARM, 4-SPRING FINGER
5-SUPPORT WHEEL, 6-SUPPORT, 7-PTO SHIELDS, 8-SAFETY BARIERE
4.
..................................................................................................
.
8.
5.
Page 5.
2.
7.
...............
3.
1.
Advertisement
Table of Contents
