Table of Contents
Advertisement
ATTENTION:
It is not allowed to drive backward with tractor during work,
when machine is in working position.
should be lifted smoothly without rapid moves.
4.10 Transport
Hitched Hay tedder with two rotors when transported on public roads should be equipped with
warning lights and triangle warning plates – relevant to local regulations.
During transport, BALTIMATIC ® Hay Tedder should be lifted up, to position ensuring
required ground clearance.
When making turns on the road keep attention to on the length of the vehicle (tractor and
hay tedder). It is not allowed to have any persons riding on the hay tedder during transport.
5. TECHNICAL SECTION
5.1 Maintaining BALTIMATIC ® hay tedder in good condition
In order to keep hay tedder in good condition every time after work is finished, the
BALTIMATIC ® Hay tedder should be cleaned from the rest of plants.
All bolts / nuts should be checked for not being missing or loose.
All moving parts should be checked.
Parts being damaged or being worn out should be renovated or replaced with new parts.
5.2 Post - seasonal service.
When season is finished, BALTIMATIC ® Hay tedder should be carefully cleaned. Worn or
damaged working elements should be replaced and all loose bolts/nuts should be tightened.
Tightener for V-belt should loosen. BALTIMATIC ® Tedder should be greased acc. To
greasing instruction. Places where paint is removed/ damaged should be cleaned and covered
by new paint.
.
Page 10
Before start, be sure that no one is near
or around the machine & tractor.
During work do not allow people to be
close to machine.
All service and repair work should be
done only when
lower position on the ground and and the
engine of tractor is OFF.
BALTIMATIC ®
Tedder is in
BALTIMATIC ®
Tedder
Advertisement
Table of Contents
