Plus Version - Wolf CWL-2-400 Installation And Operating Instructions Manual

Operation
4.4

Plus version

The 'Plus' version is equipped with an extra control board with more connections for various applications.
This extra control board is located in a plastic housing behind the existing control board on top of the
appliance.
It is also possible to remove the entire Plus pcb including casing from the appliance and mount it on, for
example, a wall separate from the heat recovery appliance; this can be handy in certain circumstances
such as a poor WiFi signal from the Plus pcb.
A standard heat recovery appliance can also later be modified into a Plus version using the Plus pcb
upgrade set.
1 = CWL appliance with mounted Basic pcb
2 = Plus pcb mounting plate
3 = Plus pcb
4 = Plus pcb protective cap
7100833_202010
xxxx
WOLF GmbH | 11