Sirius Satellite Radio Setup; Sirius Satellite Radio Operation - Magnadyne Sirius M9900DVDS Installation And Operation Manual

Sirius Satellite Radio Setup

Note: If your Sirius tuner is not activated, call 1-888-539-SIRIUS to activate. The Sirius Tuner ID Number
(ESN) is required during the activation process. Following the instructions below to access the Sirius
Tuner ID Number (ESN):
Accessing you Sirius Tuner ID Number (ESN):
1. Push the MODE button until "SIRIUS" appears in the display area.
2. Push the TUNE button until "DIRECT" appears in the display area. Wait a
few seconds and "CH 000" will then appear in the display.
3. Push the BAND button and the first 4 digits of the 12 digit Sirius Tuner ID
Number (ESN) will be displayed.
4. Push the DISP button and the last 8 digits of your 12 digit Sirius Tuner
ID Number (ESN) will be displayed.
5. Push the TUNE button to exit.

Sirius Satellite Radio Operation

Please note that satellite radio signal may be blocked by trees, buildings, bridges or tunnels.
Selecting Sirius Satellite Radio: Push the MODE button until "SIRIUS"
appears in the display. Please be patient as it may take a minute to receive a
satellite signal.
Manual Tuning:
1. Push the TUNE knob until "NORMAL" appears in the display.
2. Rotate the TUNE knob to select a station from 01-182.
Category Tuning:
1. Push the TUNE knob until "CATEGORY" appears in the display.
2. Push button 1 or 2 to find the desired category.
3. Rotate the TUNE knob and select a station within the category.
MODE AS/PS
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
BAND W-BND
EQ DISP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
MODE AS/PS
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
DISC/CAT
TUNE/TRACK/CH
PUSH
SCAN/S-MOD/SETUP
15