Makita GA7010C Instruction Manual page 10

OPTIONAL ACCESSORIES
CAUTION:
• These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use
of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regarding these accessories, ask your local Makita Service Center.
2
3
4
5
1
Wheel guard for Depressed center grinding wheel /
2
Multi-disc / Wire wheel brush
3 Inner flange / Super flange
4 Depressed center grinding wheel / Multi-disc
5 Lock nut / Ezynut
Wheel guard for Abrasive cut off wheel /
6
Diamond wheel
7 Inner flange 78 (Australia and New Zealand only)
8 Abrasive cut off wheel / Diamond wheel
*1
Do not use Super flange and Ezynut together.
*2
In some European countries, when using a diamond wheel, the ordinary guard can be used instead of the special
guard covering the both side of the wheel. Follow the regulations in your country.
*3
Use Inner flange 78 and Outer flange 78 together. (Australia and New Zealand only)
013093
NOTE:
• Some items in the list may be included in the tool package as standard accessories. They may differ from country to
country.
10
1
6
6
3
7
8
8
5
9
5
Side grip
*1
*2
10
2
11
13
12
9
(Australia and New Zealand only)
10
11
12
13
14
*3
–
–
14
Outer flange 78
Rubber pad
Abrasive disc
Sanding lock nut
Wire wheel brush
Wire cup brush
Lock nut wrench
Dust cover attachment
*3