Philips GC350 User Manual page 32

Problem
EN The steamer
does not heat
up.
The steamer
does not
produce any
steam.
Water droplets
drip from the
steamer head.
32
Possible cause
The steamer is not
plugged in properly or
not switched on.
The steamer is not
plugged in properly or
not switched on.
The steamer has not
heated up sufficiently.
You have not pressed
the steam trigger fully.
The water level in the
water tank is too low.
The water tank is not
in place.
The steamer has not
heated up sufficiently.
Solution
Check if the mains plug is
inserted properly and its
wall socket is working.
Check if the steamer is
switched on.
Check if the mains plug is
inserted properly and its
wall socket is working.
Check if the steamer is
switched on.
Let the steamer heat up
for 45 seconds (steam-
ready lights up). The
steamer is ready to be
used when the light
goes off.
Press the steam trigger
fully for a few seconds.
Unplug the steamer and
refill the water tank.
Insert the water tank
properly.
Let the steamer heat up
for 45 seconds (steam-
ready lights up). The
steamer is ready to be
used when the light
goes off.