Handling And Operation; Initial Use; Switching The Appliance On/Off And Setting The Colour Change And Timer Functions - Silvercrest SAD 3D 12 A1 Operating Instructions Manual

Handling and operation

Initial use

IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a stable and level surface.
♦ Remove the glass screen w and the lid 1.
♦ Fill the water tank 3 with at least 20 ml (maximum 100 ml)
clean tap water using the provided measuring beaker r. Note
the maximum filling level 6, which is marked by a border.
♦ Add 2–4 drops of the desired oil to the water.
♦ Afterwards, place the lid 1 and the glass screen w back on
the water tank 3.
♦ Connect the mains adapter e to the mains socket.
Switching the appliance on/off and setting
the colour change and timer functions
♦ Press the
Aromatic mist production starts.
♦ Press the
button 9 again to select the current colour. By pressing
the
the button 9 repeatedly, you can select your favourite
colour or switch off the lighting completely.
♦ Press the
(0.5h). Press the
to 1 hour (1h), 2 hours (2h) or 3 hours (3h) or to switch the timer
function off completely. The green LED shows the set time. If no
LED is lit, the timer function is switched off. The appliance switches
off automatically when the set time has elapsed.
│ GB │ IE
■ 12
button 0 to switch on the appliance.
button 9 to start the colour change function. Press
button q to start the timer function at 30 minutes
button q repeatedly to set the timer function
SAD 3D 12 A1