Disposal Of Packaging; Electrical Connection - Silvercrest SAD 3D 12 A1 Operating Instructions Manual

Disposal of packaging

The packaging materials have been selected for their
environmental friendliness and ease of disposal and are
therefore recyclable. Dispose of packaging materials
that are no longer needed in accordance with
applicable local regulations.
Dispose of the packaging in an environmentally friendly
manner. Note the labelling on the packaging and
separate the packaging material components for
disposal if necessary. The packaging material is labelled
with abbreviations (a) and numbers (b) with the
following meanings: 1–7: Plastics, 20–22: Paper and
cardboard, 80–98: Composites.

Electrical connection

IMPORTANT
► Before you connect the appliance to the power supply, check to
ensure that the required input voltage as given on the type plate
tallies with that for the intended power source. To avoid possible
damage to the appliance this data must match.
Check to ensure that the cable for the power adapter e is not
►
damaged and that it does not lead over hot surfaces and or
sharp edges, otherwise it could be damaged.
Ensure that the cable for the power adapter e is not over-taut
►
or kinked.
Connect the power adapter e to the appliance by inserting the
♦
plug into the plug socket 8 on the underside of the appliance.
SAD 3D 12 A1
GB │ IE │
11 ■