Electrical Connection; Handling And Operation; Initial Use - Silvercrest SAD 12 C2 Operating Instructions Manual

Electrical connection

IMPORTANT
► Before you connect the appliance to the power supply, check
to ensure that the required input voltage as given on the type
plate tallies with that for the intended power source. To avoid
possible damage to the appliance this data must match.
Check to ensure that the cable for the power adapter 0
►
is not damaged and that it does not lead over hot surfaces
and or sharp edges, otherwise it could be damaged.
Ensure that the cable for the power adapter 0 is not over-taut
►
or kinked.
Connect the power adapter 0 to the appliance by inserting the
♦
plug into the plug socket 9 on the underside of the appliance.

Handling and operation

Initial use

IMPORTANT
► It is possible that oil drops may cause damage to furniture
surfaces. If necessary, place a cloth under the appliance.
♦ Place the appliance on a level and stable surface.
Remove the diffusion cone 1 and fill the water tank 4, by
♦
using the supplied measuring beaker, q with max. 80 ml of
clean mains water. Pay heed to the maximum filling level 8.
♦ Add 2 to 4 drops of the desired oil to the water.
Then replace the diffusion cone 1 onto the water tank 4.
♦
Insert the power adapter 0 into the mains power socket.
♦
SAD 12 C2
GB │ MT │
63 ■