Cleaning/Descaling The Appliance; Storage - Silvercrest SAD 3D 12 A1 Operating Instructions Manual

Cleaning/descaling the appliance

Clean the water tank 3 after each use so as to remove oil re-
♦
sidue as completely as possible. For this, use a soft and slightly
moist cloth. In the case of stubborn stains, place a few drops of
mild detergent on the damp cloth.
NOTICE
► Use common retail sunflower oil to remove discolourations
caused by oils from the water container 3.
Should the steam production diminish, the ceramic disk 3
♦
located at the bottom of the water tank 4 must be cleaned.
For this, use a slightly moistened cotton bud.
♦ Clean the surfaces of the appliance with a soft and dry cloth.
♦ To descale the appliance, use a standard commercial liquid de-
scaling agent. Pay heed also to the manufacturer's instructions
for your descaler.
Fill the water tank 3 to the maximum filling level 6 with
♦
descaler and let it stand until the scale is fully dissolved.
Pour the scale removal away and then clean the water tank 3
♦
with a soft and slightly damp cloth.

Storage

Should you decide to not use the appliance for an extended period,
disconnect it from the mains power supply and store it in a clean
and dry location away from direct sunlight.
│ GB │ IE
■ 14 SAD 3D 12 A1