Fixture Limits - ADJ Wolfmix WMX1 Reference Manual

F I X T U R E L I M I T S
The fixture limits screen allows for minimum and maximum pan and tilt values to be set on the selected
fixtures. When set correctly, fixture beams will move together in the desired area.
Displayed data:
• Minimum and maximum pan and tilt values of the selected fixtures
• An orange rectangle to represent the values. Dragging the white cursor within the rectangle moves all
fixtures in the project together, allowing for the boundaries to be tested.
Encoder actions:
• Move the 4 encoders to adjust the min pan, max pan, min tilt and max tilt. Push the encoders to reset
these values to 0 or 100%
Toolbar actions:
• Sweep the selected fixtures from left to right.
• Sweep the selected fixtures up and down.
• Invert the selected fixtures Pan.
• Invert the selected fixtures Tilt.
11