5.11 Loading/Unloading From The Side; Using The Powersheet ® (Option) - Knapen Trailers Exside User Manual

Table of Contents

Advertisement

5.11 Loading/unloading from the side

Points for attention are:
When loading and unloading at the front and rear in
combination with the liftable upper rail, make sure the
load (and/or fork-lift) does not touch the fixed rails as this
can cause damage.
When loading or unloading pay attention to the height of the
load so it does not touch the upper rail (1).
Make sure the load and the forks of the fork-lift are
sufficiently high to avoid catching on a floor profile, side
profile or lashing hook.
Do not slide the load over the floor. Lift the load at all times.
5.12 Using the PowerSheet
Points for attention are:
If the sheet closes on the same side as the side doors, make
sure the side doors are fully closed when the sheet is opened
and closed.
Make sure at least three bars (front-centre-rear) are in
position so the sheet can roll and unroll properly.
5.12.1 Using the PowerSheet
Points for attention are:
If the sheet closes on the same side as the side doors, make sure the side doors are fully closed when the sheet
is opened and closed.
Before lifting the upper rail, ensure that the cover is closed but not tensioned.
Never tension (close) the sheet when the upper rail is lifted.
Make sure at least three bars (front-centre-rear) are in position so the sheet can roll and unroll properly.
(option)
®
with a liftable upper rail (option)
®
User Manual EXSIDE EN - v202101
1
17

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Exside and is the answer not in the manual?

Table of Contents