Troubleshooting - Hunter Anorak Installation Manual

Ceiling fans work in two directions: downdraft
(counterclockwise rotation) and updraft (clockwise rotation).
To change the direction of air flow, turn the fan off and let
it come to a complete stop. The reversing switch is located
inside the light fixture. It can only be accessed when the
glass is removed. Slide the reversing switch to the opposite
position. Restart the fan.
Fan Doesn't Work
• Make sure power switch is on.
• Check the circuit breaker to ensure the power is turned on.
• Make sure the blades spin freely.
• Check the plug connection in the switch housing.
Excessive Wobbling
• Make sure the blades are properly installed on the blade iron posts.
• Turn the power off, support the fan carefully, and check that the hanger
ball is properly seated.
• Use the provided balancing kit and instructions to balance the fan.
Remote Control of Fan is Erratic
• Make sure the battery is installed correctly.
• Install a fresh battery.
Reversing the Fan
Reverse
Switch

Troubleshooting

Noisy Operation
• Make sure the blades are properly installed.
• Check to see if any of the blades are cracked. If so, replace all of the
blades.
Multiple Remote Issues
• If you have multiple remotes or multiple remote-controlled fans installed
on the same circuit breaker and you are experiencing interference or
faulty operation of your remote controls, please go to
www.HunterFan.com/FAQs and click
remote-controlled fans?"
Updraft (clockwise rotation)
creates a more indirect airflow.
Updraft airflow is great for
moving warm air downward.
Downdraft (counterclockwise
rotation) creates a direct breeze
and maximum cooling effect.
"How do I properly install multiple
for information on how to correct this issue.
Hunter Pro Tip:
Cleaning the Fan
Use soft brushes or cloths to prevent scratching.
Cleaning products may damage the finishes.
1886
Note:
Fan style may vary.
10