Modes And Sensitivity - Philips Avent SCD921 User Manual

Modes and sensitivity

Mode
Video 20.3 o C
Modes and Sensitivity
Video < >
Audio
Eco
Privacy
Video 20.3 o C
Modes and Sensitivity
Video < >
Audio
Eco
Privacy
Video 20.3 o C
Modes and Sensitivity
Video < >
Audio
Eco
Privacy
This baby monitor has three different modes that allow you to choose
how you want to monitor your baby: Video, Audio, Eco.
The sensitivity level of the baby unit defines what you hear through the
parent unit. When the level is set to high, you will hear many sounds,
including soft background sounds. When the sensitivity level is set low,
you will hear only the louder sounds�
With the baby monitor on, press the mode button on the top left of the
parent unit, press the top or bottom part of the control button to switch
between these different modes, and then press the confirm button to
select the desired mode�
You can choose different sensitivity levels for different modes by pressing
the left or right part of the control button�
The display shows the selected mode�
The selected mode is also indicated in the status bar�
When turning on the device, the mode that was last used will be active.
If your baby only makes soft sounds, the sensitivity of the baby unit needs
to be set to a high level on the parent unit�
The louder your baby sounds, the lower the sensitivity can be set on the
parent unit�
Note: In Audio and Video mode, you will have continuous sound when
the sensitivity level is set to the highest. Otherwise, low sounds will be
muted�
Tip: The sensitivity level can be adjusted so you will always hear your
baby without the disruption of other sounds� When there is a lot of
background noise, turn down the sensitivity so that you will not hear
these sounds through the parent unit�
Press the confirm button to save the new setting.
- 19 -