Daikin FTXS-L Series Engineering Data page 25

Capacity Tables
Symbols:
AFR : Airflow rate
BF : Bypass factor
EWB : Entering wet bulb temp.
EDB : Entering dry bulb temp.
TC : Total capacity
SHC : Sensible heat capacity
PI : Power input
24
Note:
(m /min.) 1. Ratings shown are net capacities which include a deduction for indoor fan
3
motor heat.
2.
3. TC, PI and SHC must be calculated by interpolation using the figures in the
(°C) / (°F)
above tables. (Figures out of the tables should not be used for calculation.)
(°C) / (°F)
4. SHC values not included in the table must be calculated using interpolation
with values of direct proportion.
(kW) / (kBtu/h)
5. Capacities are based on the following conditions.
(kW) / (kBtu/h)
Corresponding refrigerant piping length : 25 ft
Level difference : 0 ft
(kW)
6. Airflow rate (AFR) and Bypass factor (BF) are tabulated above table.
7. Cooling capacity at –15°C / 5°F
Temp: Celsius
TC, SHC, PI: kW
60 Hz, 208 - 230 V
EWB
14.0
Temp: Fahrenheit
TC, SHC: kBtu/h
PI: kW
60 Hz, 208 - 230 V
EWB
57.2
shows nominal (rated) capacities and power input.
INDOOR OUTDOOR
EDB –15 (°CDB)
°C °C TC SHC PI
20.0 3.54 2.66 0.23
INDOOR OUTDOOR
EDB 5 (°FDB)
°F °F TC SHC PI
68.0 12.08 9.08 0.23
Split Type Air Conditioners FTXS-L / FDXS-L Series
EDUS091128
3D074636