Installing The M.2 Ssd Module - Dell EMC PowerEdge R940 Installation And Service Manual
Hide thumbs
Also See for EMC PowerEdge R940:
- Installation and service manual (161 pages) ,
- Technical manual (51 pages) ,
- Service (14 pages)
Table of Contents
Advertisement
Figure 81. Removing the M.2 SSD module
Next steps
Install the M.2 SSD
module.
Installing the M.2 SSD module
Prerequisites
1. Follow the safety guidelines listed in
Safety instructions
on page 29.
2. Follow the procedure listed in
Before working inside your system
on page 30.
Steps
1. Align the M.2 SSD module connectors with the connectors on the BOSS card.
2. Push the M.2 SSD module until the module is seated firmly on the BOSS card.
3. Secure the M.2 SSD module on the BOSS card with the retention straps and screws.
Installing and removing system components
97
Advertisement
Table of Contents
